They easily slip on and screws securely to the end of the Digslider.

The Digislider motors, when attached, can operate the Digislider in a horizontal, vertical and upside down/overhead way. The motors are well suited to move small DSLRs to larger cameras with lenses, microphones, and other gear (about 6 kgs/13lbs maximum for horizontal movement and 3,5 kg/7.7 lbs maximum for vertical movement).

Digislider Fast Motor

(for video)

The Digislider Fast Motor is designed for video use and with the Digislider Controller will allow a top speed of 15 seconds per metre, using a 12v external battery, or 20 seconds per metre, using the controllers built-in 9V battery source. Its slowest speed is 1 minute per metre.

Digislider Slow Motor

(for time-lapse photography)

The Digislider Slow Motor is designed for time-lapse photography use and with the Digislider Controller will allow a top speed of 3.75 minutes per metre, using a 12v external battery, or 5 minutes per metre, using the controllers built-in 9V battery source. Its slowest speed is 25 minutes per metre, but with 6V external power, you can get up to 4 hours per metre.

It can also be used with the MX2 controller by Dynamic Perception which will enable:

• Shoot-Move-Shoot (Interleaved)

• Extended run time (up to days between moves)

• From 0.01"/0.25mm to 30.9"/78.5mm travel between shots

• "Simple" mode lets you specify travel in real-time

• Manual Motor Control