Digislider Time Lapse Slider Kit

£347.00 £400.00

£416.40 (inc. EU VAT)

Collections: Digislider Bundle Kits, Digislider igus kits, Featured Products

Type: Camera Dolly Slider

Light. Precise. Portable and Affordable

Motorised for short & long exposure Time Lapse

Real-time motion and/or Shoot-Move-Shoot Time Lapse control

5kg/11lbs Vertical & 10kg/22lbs Horizontal load

Smooth video-like motion with hand crank system

All kits include a Digislider (75cm, 100cm, 150cm or 200cm), Controller (options are below), Slow Motor, and a 8 x AA battery holder to power everything.

The Motors easily slip on with minimal effort enabling a fully motorised dolly slider in seconds.

Options:

Standard

(Continuous Motion)

The Standard kit includes all the above, and an Motor Controller MKII. It provides 15 secs to 4 mins p/metre with the Fast Motor, 4 mins to 1.5 hrs p/metre with the Slow Motor.

Digislider Motor Controller MKII for Video and Time Lapse

The MKII Motor Controller features:

• Real-Time bi-directional controller.
• Reduced high pitch motor noise
• Works for Video and Time Lapse (camera trigger device not supplied)
• Internal 9v Battery compartment
• Plug-in and go

The Motor Controller MKII is a real-time continuous motion controller and it allows control of both the Fast and Slow Motors, including the speed and direction (with the dial). It will control the Fast Motor (15 seconds to 3 minutes per metre with a 12 volt power source and 20 secs to 4 mins with a 9 volt power source) and the Slow Motor at speeds as fast as 4 minutes per metre. It can achieve speeds as slow as 40 minutes per metre with a 12 volt power source, 1.5 with a 9 volt power source.

Premium MX3

(Continuous and Shoot-Move-Shoot)

The Premium MX3 kit includes all the above and the MX3 Controller. In continuous motion mode it provides 15 secs to 4 mins p/metre with the Fast Motor and 4 mins to 1.5 hrs p/metre with Slow Motor. In shoot-move-shoot mode it provides 20 secs to 15 days p/metre with the Fast Motor and 5 mins to 1 month p/metre with the Slow Motor.

Dynamic Perception MX3 Time Lapse Controller with Digislider for Time Lapse and Video

The MX3 Controller features:

•Real-time video and shoot-move-shoot time lapse
•Ramping/feathering and delayed lead-ins
•Control of auto-focus and exposure on-camera
•Live voltage metering and warning levels when batteries are low
•Auto-dim the screen to reduce power draw when shooting in the field
•Advanced motor control reduces power draw during continuous motion moves

Compatible with all cameras with an supported cable including Panasonic and Sony's A7 range. Start shooting motion-integrated time lapse videos right away. Greater control and greater accuracy than the SMS Controller, greater range of increments from 0.1mm to 20cm.

Optional Extras

The new Digislider Auto Pan allows for up to 100 degrees of automatic panorama or tracking of your camera as it moves across the slider.

A hand operated quick release adjustable mechanism at each end of the slider alters the amount and direction of pan to focus as close as 25cm/10" to infinite.

The Digislider will need to be elevated slightly above the ground for the panning device to be attached so we recommend our Adjustable Feet.

digislider auto pan add-on

The Adjustable Feet easily attach to the bottom of the rail via 3/8 thumb screws, or to the Digislider Add-On blocks using the rubber feet. The legs are individually adjustable to allow stable shots on uneven surfaces. The rubber feet grip to most surfaces without a problem. Strong, light weight, aluminium support with steel legs. Adjustable Feet for Digislider Motorized Slider

The Digislider Kill Switch has been developed to fit into the latest Digislider’s pulley housing. It automatically stops the device when the carriage reaches the end. As soon as you change direction on your Digislider Controller, it will start working again. The motor mounts are design so that the belt skips but the motor will keep running, but if you want the motors to stop completely, this is the perfect solution. Kill Switch for Digislider Motorized Slider

The Quick Release Mount will enable you to release the motor with one pull, which will allow much quicker motor changes and a faster change over to the hand crank. The Quick Release Motor Mount comes with one motor plate that attaches to the bottom of the motor. Quick Release Motor Mount for Digislider Motorised Slider

A hand operated quick release adjustable mechanism at each end of the slider alters the amount and direction of pan to focus as close as 25cm/10" to infinite.

The Digislider will need to be elevated slightly above the ground for the panning device to be attached so we recommend our Adjustable Feet.

Digislider Features:

Smooth & fluid movement

Perfect for any loads up to 10kg horizontally and 5kg Vertically

Aluminium construction for maximum strength and lightness

New German engineered low coefficient of friction, low wear shaft & carriage bearings

Easy & quick mounting points for camera and tripod

3/8 male thread to attach your own tripod head

5 x 3/8” tripod threads

16 x 1/4” threads

Specialised DryLin® plastics ensures maintenance free all weather durable smooth & silent gliding

Digislider igus Drylin Linear Carriage Bearings for super smooth motion

Digislider rubber grips for maximum stability

Heavy duty rubber grips

Maximum friction & stability

Quick Adjustment Resistance Screw for the perfect fluidity.

Digislider Motorized Slider Resistance Screw

Easy Release Motor Mounts

Weight:

75cm Digislider = 2.75kg

100cm Digislider = 3kg

150cm Digislider = 3.5kg

200cm Digislider = 4kg

(+0.5kg for the motor and a controller)

(+1.3kg for each Rotary Unit inc. motor)

Dimensions:

Digislider Length = rail length +10cm (e.g. Digislider 100cm total length is 110cm)

available carriage movement is the length -10cm (e.g. Digislider 100cm total available length of movement is 90cm)

Width = 11cm

Depth = 8cm

What you will need:

Tripod and Head (not included)

A sturdy tripod is needed if you want to raise the Digislider higher. Any tripod head capable of holding your camera is fine.

Camera cable types and their supported camera models:

Canon N3 Cable
Canon: 10D, 20D,30D, 40D, 50D, 7D, 6D, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III

Canon E3 (3/32" TRS) Cable (included)
Canon: 60D, 70D, 80D, All the 'Rebels' (500D - 800D etc), T41, T3i, T2i, T1i, Kiss
Pentax: K5, K7, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D
Samsung: GX, 1L, GX 1S, GX-10, GX-20
Contax: 645, N1, NX, N Digital

Nikon 3N/DC2 Cable
Nikon: D90, D3100, D5000, D7000, D600

Nikon DC1 Cable
Nikon: D70S,D80

Nikon 10-pin/DC0 Cable
Nikon: D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D300, D700, D800, F90x, F90, F100, F6, F5
Kodak: DCS-14n
Fujifilm: S3 Pro, S5 Pro

Panasonic 4-Pole/RS1 Cable
Panasonic: DMC-G1, DMC-GH1, DMC-G2, DMC-GH2, DMC-GH3, DMC-GF1, DMC-G10,DMC-FZ50 SERIES, DMC-FZ30 SERIES,LC-1,L-1GH-4
Leica: DIGILUX2,DIGILUX3

Sony Alpha S1 Cable
Sony: A700, A900, A350, A300, A200, A100, A100k
Konica Minolta: DIMAGE A2, A1, 9, 7HI, 7I, 7, 5, 4, 3, DYNAX7D, DYNAX5D

Sony Alpha S2 Cable
Sony: Alpha 7, 7R & 7S, NEX-3NL, A6000, A58, HX300, RX10 & RX100N

Olympus UC1 Cable
Olympus : e520, e510, e420, e410, e300, sp-570 uz, sp-560 uz, sp-550 uz, sp-510 uz, OM-D

Olympus CB1 Cable
Olympus: E1, E3, E10, E20,E30