Digislider High Torque Motor (FAST)

The new noise attenuated power motors are here and are replacing all the first generation motors. A new steel encased gearbox means there is a considerable reduction in motor noise. The new metal gearbox incorporates sleeve bearings, enabling the high torque transfer to be transmitted through the gearbox, resulting in 45% more torque than our previous motors.

The motor mount is designed to skip the teeth on the motor pulley belt to prevent internal motor damage when the carriage reaches the end of the track.

They easily slip on and screws securely to the end of the Digislider.

The Digislider motors, when attached, can operate the Digislider in a horizontal, vertical and upside down/overhead way. The motors are well suited to move small DSLRs to larger cameras with lenses, microphones, and other gear (about 10 kgs/22lbs maximum for horizontal movement and 5 kg/11 lbs maximum for vertical movement).

Fast Motor

The Digislider Fast Motor is designed for video and with any of the Digislider Motor Controllers will allow a top speed of 15 seconds per metre, using a 12v external battery, or 25 seconds per metre, using a 9V power source. Its slowest speed is 3 minutes per metre.

(Not compatible with the MX2 controller by Dynamic Perception or our SMS controller)

Assembled:

1 x Fast Motor

1 x Motor Mount Plate
3 x Small Screw
1 x Pulley
2 x Pulley Grub Screw
2 x Thumb Screw
2 x Rubber Washer
1 x Rubber Belt