Digislider

£235.00

Summary
Details
Contents

We are out of stock of the Digislider 75cm due to overwhelming number of pre-orders. Any 75cm Digislider orders will be delayed until the rails are back in at the end of August.

• Light. Precise. Portable and Affordable.
• Motorised Upgrade options
• Vertical and Horizontal mounting
• Aluminium and Steel parts
• Sturdy Solid build
• Smooth video-like motion with hand crank system
• Easy Operation.
The Digislider is the Digislider Add-On with a 75cm or 100cm long IGUS solid 16-60 rail and carriage. All you need is a tripod head and a camera and you are ready to go.

It is solid as a rock, and will handle all terrain and weather.

As solid as the Kessler Pocket Dolly and the same rail and carriage as the Glidetrack HD range, yet at a fraction of their cost.

It enables smooth and accurate motion via a hand crank (The carriage can also be moved up and down the the rail by hand).

It does exclude the Digislider Fast and Slow Motors (for video and time lapse) which easily slip on with minimal effort enabling a fully motorised dolly slider in seconds with the Digislider Motor Controller and/or Digislider Shoot-Move-Shoot Controller (sold separately).

The Digislider is well-suited for small DSLRs to larger cameras with lenses, microphones, and other gear (about 10 kgs of weight in total for easy movement).

It now has new wider precision engineered shafts with new German engineered polymer low coefficient of friction, low wear shaft bearings. We have a new Hybrid Roller Carriage, using the same igus roller bearing technology as the Glidetrack Hybrid Carriage, reducing friction even more.

The rail now has 5 x 3/8 inch tripod thread and 12 x 1/4 inch light stand thread. This allows numerous varieties of attachments along with the tripod or light stands. It also allows for a more sturdy attachment when using a single tripod as both the 3/8 and 1/4 inch screws on the tripod head plate can be utilised, either way to allow more sturdy vertical shots or tilted horizontal shots.
1 x Digislider Add-On:
• 2 x shafts
• 2 x small pulley
• 1 x large motor pulley
• 2 x pulley box
• 4 x box caps
• 1 x belt for 100cm/39″ rail
• 1 x belt clip
• 1 x 3/8-16 UNC screw
• 4 x countersunk rail attachment screws
• 2 x 5mm grub screw
• 4 x 10mm grub screw
• 1 x revolving handle
• 1 x handle shaft
• 1 x handle spacer
• 4 x rubber feet
• 4 x steel rubber feet screws

1 x Allen Key Set

1 x rail

1 x carriage
Assembly is required - Click here for Digislider Assembly Instructions

Type: Camera Dolly Slider

Pin It

Related Items

Add-On for Glidetrack HD or igus 16-60 rail from £95.00

+ Quick View

High Torque Motors from £46.00

+ Quick View

Motor Controller £49.00

+ Quick View

Digislider

Summary
Details
Contents

We are out of stock of the Digislider 75cm due to overwhelming number of pre-orders. Any 75cm Digislider orders will be delayed until the rails are back in at the end of August.

• Light. Precise. Portable and Affordable.
• Motorised Upgrade options
• Vertical and Horizontal mounting
• Aluminium and Steel parts
• Sturdy Solid build
• Smooth video-like motion with hand crank system
• Easy Operation.
The Digislider is the Digislider Add-On with a 75cm or 100cm long IGUS solid 16-60 rail and carriage. All you need is a tripod head and a camera and you are ready to go.

It is solid as a rock, and will handle all terrain and weather.

As solid as the Kessler Pocket Dolly and the same rail and carriage as the Glidetrack HD range, yet at a fraction of their cost.

It enables smooth and accurate motion via a hand crank (The carriage can also be moved up and down the the rail by hand).

It does exclude the Digislider Fast and Slow Motors (for video and time lapse) which easily slip on with minimal effort enabling a fully motorised dolly slider in seconds with the Digislider Motor Controller and/or Digislider Shoot-Move-Shoot Controller (sold separately).

The Digislider is well-suited for small DSLRs to larger cameras with lenses, microphones, and other gear (about 10 kgs of weight in total for easy movement).

It now has new wider precision engineered shafts with new German engineered polymer low coefficient of friction, low wear shaft bearings. We have a new Hybrid Roller Carriage, using the same igus roller bearing technology as the Glidetrack Hybrid Carriage, reducing friction even more.

The rail now has 5 x 3/8 inch tripod thread and 12 x 1/4 inch light stand thread. This allows numerous varieties of attachments along with the tripod or light stands. It also allows for a more sturdy attachment when using a single tripod as both the 3/8 and 1/4 inch screws on the tripod head plate can be utilised, either way to allow more sturdy vertical shots or tilted horizontal shots.
1 x Digislider Add-On:
• 2 x shafts
• 2 x small pulley
• 1 x large motor pulley
• 2 x pulley box
• 4 x box caps
• 1 x belt for 100cm/39″ rail
• 1 x belt clip
• 1 x 3/8-16 UNC screw
• 4 x countersunk rail attachment screws
• 2 x 5mm grub screw
• 4 x 10mm grub screw
• 1 x revolving handle
• 1 x handle shaft
• 1 x handle spacer
• 4 x rubber feet
• 4 x steel rubber feet screws

1 x Allen Key Set

1 x rail

1 x carriage
Assembly is required - Click here for Digislider Assembly Instructions